NYP type high viscosity gear pump referred to as high viscosity pump, is a gear pump, specially used for conveying materials with higher viscosity, such as: rubber, resin, asphalt, etc.,
Model:NYP7.0 ; NYP24 ; NYP52 ; NYP80 ; NYP111 ; NYP160 ; NYP220 ; NYP320 ; NYP727 ; NYP1670.
- Model: NYP
- Type: high viscosity gear pump;
- Flow rate: 1-50 cubic meters/hour;
- Purpose: high viscosity pump;
- Viscosity range: 100-300000CST;
- NYP high viscosity gear pump structure: mainly internal and external rotor, shaft, pump body, front cover, bracket, seal, bearing and so on. Sealing has two forms of mechanical seal and packing seal, for high temperature, high viscosity and strong corrosive medium, choose packing seal. When conveying crystallizable materials, heat preservation jacket can be designed on the front cover and pump body, which can be melted by steam insulation during work. It rotates clockwise from the overhang end of the spindle to the pump. The structure of the high viscosity pump is more complex than the ordinary gear pump, do not disassemble maintenance, if there is a problem, please contact the manufacturer in time to help you solve.
Choose the advantages of high viscosity pump/nyp high viscosity gear pump:
1: Long life
2: pump smooth operation, not prone to failure, so that you in use to avoid unnecessary trouble and loss.
3: smooth conveying liquid, no pulsation, small vibration, low noise.
4: standard flange connection, only light pump head can be provided.
5: high viscosity gear pump speed and flow linear function relationship, can be appropriate to change the speed to change the flow of the pump. High viscosity pump is especially suitable for conveying high viscosity medium. High viscosity pump shaft end adopts mechanical seal.
6: Pay attention to the selection must be contacted with our factory sales staff and then selection, according to the viscosity to determine which type of pump.
NYP high viscosity gear pump /NYP high viscosity pump flow and pressure gauge:
Model |
viscosity
(cst) |
Speed |
Flow |
Mpa |
Inlet/outlet |
NPSHr
m
|
Power
KW |
(S)(D) |
NYP-0.78
|
2000/600 |
910/1390 |
0.4/0.6 |
0.8
|
15
|
5
|
0.75
|
Y90S-6/ Y802-4
|
NYP-2.3
|
2000/600 |
910/1390 |
1/2 |
0.8
|
25
|
5
|
1.1/1.5 |
Y90L-6/ Y90L-4
|
NYP-3.6
|
600/2000 |
940/640 |
2/1.5 |
0.8
|
40
|
5
|
1.5
|
Y100L-6/Y90L-4
|
NYP-7.0
|
2000/6000 |
960/500-640 |
4/2.3 |
0.8
|
40
|
5
|
2.2/3 |
Y112M-6/ SCJ-100
|
NYP-24
|
2000/6000 |
357-475/300 |
5-6.5/4 |
0.8
|
50
|
5
|
5.5
|
SCJ-240/ DCJ-100
|
NYP-50
|
2000/6000 |
357-475/300 |
10-14/9 |
0.8
|
50
|
5
|
7.5/5.5 |
SCJ-240/ DCJ-100
|
NYP-80
|
2000/6000 |
315-417/228 |
15-20/10 |
0.8
|
80
|
5
|
15/11 |
SCJ-290/ DCJ-112
|
NYP-110
|
2000/6000 |
315-417/228 |
20-28/15 |
0.8
|
80
|
5
|
18.5/15 |
SCJ-240/ DCJ-112
|
NYP-160
|
2000/6000 |
320-420/320 |
30-40/30 |
0.8
|
100
|
5
|
18.5
|
SCJ-320/ DCJ-320
|
NYP-220
|
2000/6000 |
220-285/160 |
30-40/20 |
0.8
|
100
|
5
|
37/18.5 |
SCJ-340/ DCJ-340
|
NYP-320
|
2000/6000 |
220-285/160 |
40-50/30 |
0.8
|
100
|
5
|
37/22 |
SCJ-340/ DCJ-340
|
NYP-650
|
2000/6000 |
160-240/120 |
60-90/45 |
0.8
|
125
|
5
|
55/37 |
SCJ-360/ DCJ-360
|
NYP-730
|
2000/6000 |
160-240/120 |
70-100/50 |
0.8
|
150
|
5
|
55/37 |
SCJ-360/ DCJ-360
|
NYP-1670
|
2000 |
160
|
160
|
0.8
|
200
|
5
|
100
|
Y315L1-4
|
NYP-1670
|
6000
|
200
|
200
|
0.8
|
200
|
5
|
132
|
Y315L2-4
|
The above is the parameter table of selection, according to different materials to choose different materials of high viscosity pump